Baseus Power Bank Power Starter Jump Starter Booster 10000mAh 12V (1000A / 500A) + Crocodile Cables Black (C00245501113-00)
Do you need a reliable jump starter that will make you independent from roadside assistance specialists and allow you to start your car in the cold? A flat battery doesn't have to be a problem if you have your own Baseus jump starter. This is a device with excellent parameters, reaching up to 1000A of peak current. Powerful enough to allow you to start your car in an emergency up to 50 times after charging! An efficient, safe, handy, and intuitive to use jump starter should be in every garage!
Specification
- Brand: Baseus
- Model: BS-CH001
- Capacity: 10000mAh/3.7V/37Wh
- Input: 5V/2.4A [Max]
- USB Output: 5V/2.4A [Max]
- Starting voltage: 12V
- Starting current: 500A
- Peak current: 1000A
- Weight: 470g
The set includes
- 1 x starter
- 1 x Type-C cable
- 1 x Smart Ignition Clamp
Key Features
- It achieves a very high peak current of 1000A and a starting current of 500A.
- Built-in display that informs about the charge level of the batteries in the jump starter.
- High-performance polymer battery cells are resistant to very low and high temperatures.
- Very low power consumption in standby mode. Can maintain up to 85% of stored energy after a year from the last full charge when not in use.
- Built-in safeguards to prevent damage to connected devices.
- The set includes crocodile clips for connecting to the battery and a USB - USB Type C cable.
- A peak current of 1000 A means immediate start of the car
- Fits many vehicles with 12V batteries
- Works without any problems at very low and high temperatures
- Up to 50 starts on 1 charge
- Digital screen with battery charge level information
- power bank for charging your phone
- 9 levels of security.
- Built-in LEDs can be used as a flashlight
Safety is a priority. Therefore, when it comes to operating the pacemaker, using the Baseus brand model allows for stable, trouble-free use of the device, which is ensured by built-in functions:
- Top quality lithium polymer batteries
- Overcharge protection
- Voltage stabilization
- Protection against electric shock
- Short circuit protection
- Over discharge protection
- Reverse connection protection
- Overheating protection
- Overcurrent protection
Due to its size and technical parameters, the device can be taken on board an airplane.
How to properly start a car with a jump starter? 3 steps:
- Connect . Insert the intelligent ignition terminals into the starter's EC5 interface - the connection status is indicated by flashing red and green lights.
- Clamp . Raise the hood of the car. Connect the cables – positive (red) to the battery clamp marked plus and negative (black) to the negative terminal on the battery.
- Start the car . Return to the vehicle and start the car. Before driving, remove the starter from the battery.
